SoftRAID 5.7.3 + Portable With Patch allow you to make and run disk arrays to add to presentation and dependability. Eighteen months ago, we put out to make an original RAID Engine in application which would equivalent the presentation and dependability of devoted hardware RAID controller, and we've additional than skillful that. Rating: 5/5 Thunderbay 4 with RAID 5 March 7, 2018 This is the second one of these that i've purchased - the first being about 3 years ago. I have been very happy with the performance and reliability so this was a no brainer for me when i needed another one.
RAID 5 is one of the most outstanding choices that a computer user can make for their home based system. While it is very plain to setup RAID 0 and 1, there is complexity involved in RAID 5 setup. RAID 5, as we know is basically set up to ensure the redundancy of data in your system. Here I will guide you how to create software RAID 5 on Windows 8.1 and 10.
There are a number of options for a computer user to create RAID for redundancy of data. However, RAID 5 has its own features and importance, and that's why we need this RAID 5 so much for our own system. Setting up RAID 5 is kind of a complex task for anyone. You can do this in Windows 8.1 and 10 a bit easily.
How to create RAID 5 on Windows 8.1 and 10
We can create both RAID 5 and RAID 1 on Windows 8.1 and 10. You would need two drives for RAID 1 and three or more than three hard drives for RAID 5. So depending on the number of drives, if you have less than three drives with you. You can't create RAID 5 on your system and you have to go for RAID 1. Although, if you want to create RAID 5, you must have three or more than three hard drives with you.
To create RAID 5, you need three or more than hard drives, all of the same capacity. These hard drives should exclude the computer's hard drive or the drive of the OS.
The other conditions for RAID 5 creation would be the drives have to be unformatted. There can be different capacity drives to create the RAID. In such cases, the whole RAID setup will be dominated by the disk with least capacity. So it is recommended to avoid using different sized hard drives.
Check Formatting of Drives
One of the most important thing to keep in mind should be the unformatted drives. In order to check that and confirm, you have to go for disk management.
Make sure you are logged in as the administrator
Go to Run window – Press Windows + R
Type in ‘diskmgmt.msc'
All the drives that you need must be Unallocated.
If there is a partition in any of them, you can delete the drive, but make sure that the data is backed up. After backing up Right click on that Drive and Click 'Delete Volume'. Your drive is unallocated now and it can be used for RAID 5. Comodo antivirus 2016 2 2 2 34.
Creating Storage
To manage the storage for RAID 5, you have to go to the storage option in the control panel. Since you have the facility to search the window.
Go to search and type ‘storage space' – it will display the storage spaces in the system.
Softraid Raid 5
You will find a hyperlink saying ‘create a new pool and storage space'.
This command will make the system search for the unformatted drives automatically. This is why we deleted the volumes earlier.
Softraid 5 7 – High Quality Raid Management Software
After the system detects the unformatted drives we can change the drive letter and format as per our convenience. In the resiliency type, select Parity, it will be followed by storage space declaration.
In size, make the display shows the storage space capacity. To know the array capacity, we have to go through some calculation. Take the smallest disk capacity, multiply it by the number of drives minus one. So, for 3 two TB hard disks, the array capacity would be {2*(3-1)}.
Press the OK button to finish the creation of RAID 5 on your system.
In size, make the display shows the storage space capacity. To know the array capacity, we have to go through some calculation. Take the smallest disk capacity, multiply it by the number of drives minus one. So, for 3 two TB hard disks, the array capacity would be {2*(3-1)}.
Press the OK button to finish the creation of RAID 5 on your system.
Softraid 5
Finally, I would say that creating a RAID 5 for your system is one of the best things to secure the data. It is a complex thing to understand, but its capability to maintain the data redundancy is outstanding. In cases of failure, the data can be regained easily with certain troubleshooting steps. If the issues go grave, there are some amazing software to recover RAID arrays on Windows. so the initial step to safeguard your work is to create a RAID 5 in your system.
